250CHAPTER 6: CONFIGURING WIRELESS PARAMETERS

To map the radio To map the radio profile to a service profile, use the following procedure. profile to a service

profile

1In the Create Radio Profile wizard, click Service Profile Selection. The Service Profile Selection page appears.

2Select the service profile in the Available Service Profiles list.

3Click Add to move the profile name to the Current Service Profiles column.

4Do one of the following:

„To apply the radio profile to 3Com radios, click Next and see “To apply a radio profile to radios”.

„To configure other radio profile parameters, click a button at the top of the wizard.

„To close the wizard and save the changes, click Finish.

To apply a radio profile to radios

1In the Create Radio Profile wizard, click Radio Selection. The Radio Selection page appears.

If the Available Members column is empty, no MAP access points have been configured for the WX switch yet. To configure MAP access points, see “Configuring Directly Connected MAP Access Points” on page 251 and “Configuring Distributed MAP Access Points” on page 258. After you configure the MAP access points, return to this wizard page to apply the radio profile to radios.

2Select the radios from the Available Members column.

3Click Add to move the radios to the Current Members column.

4Click Finish to save the changes and close the wizard.

Page 250
Image 250
HP Manager Software manual Profile, To apply a radio profile to radios