HP Manager Software manual To modify configuration polling options

338CHAPTER 8: MANAGING WX SYSTEM IMAGES AND CONFIGURATIONS

To modify configuration polling options

1Display the Managed Devices tab by doing one of the following:

„Click on Local Changes or Network Changes in the Alerts panel.

„Select Manage > Managed Devices from the main 3WXM toolbar.

2Click Options on the Managed Devices tab’s toolbar. The Managed Device Options dialog box appears.

3To enable the detection of configuration changes in the network, make sure Poll Config is selected.

To disable automatic detection, clear Poll Config. By default, this option is enabled.

4To specify how often network checks occur, specify the interval between checks, from 1 to 1440 minutes (24 hours), in the Interval box. The default is 15 minutes.

5To be notified of network changes by a popup message, select Prompt when network changes are detected.

To disable the popup message, deselect the option.

Disabling the popup message does not affect the Network Changes information in the Alerts panel. The Alerts panel still notifies you of network changes.

6To instruct WX switches to save deployed configuration changes in their configuration files, select Save WX Configuration on Deploy.

To disable saving deployed changes, deselect the option. By default, this option is enabled.

7Click Close to save the changes and close the dialog box.