HP Manager Software manual WX4400 switches support indirect MAP connections only

156CHAPTER 4: PLANNING THE 3COM MOBILITY SYSTEM

WX4400 switches support indirect MAP connections only.

12To change the number of redundant connections for the distributed connection type, type the number in the Redundant Level box.

13For direct connections, the redundancy level is always 1.

14To update all the constraints for the areas you will select in step 15, select Update All Constraints. By default, 3WXM applies only changed constraint values to the selected areas. This default behavior preserves any constraint changes you make to individual areas when you configure them.

15Select the coverage areas for which you want to compute and place MAP access points. To select a coverage area, click the box in the select column.

16Click Next. The Manage Constraints Progress page is active.

17When the Completed Applying Constraints message is displayed in the Manage Constraints Progress page, click Finish to save the changes. Go to “To compute and place MAP access points”.

If you are using a complex concave polygon as a coverage area, computation of MAP access points might take longer than the computation for a simpler area.