Changing WX Connection Settings 487

If this is the first user account, 3WXM Services inserts the username you used to log onto the machine that is running 3WXM Services in the Account Name box. However, you are not required to use this name. In fact, you are not required to use a name that matches a user account on the machine.

The 3WXM Services automatically makes the first user account you add an Admin account.

„Add Provision Account — Users with provision role can change the list of WX switches monitored by the service.

„Add Monitor Account — Users with the monitor role can enable 3WXM to access the service but cannot change any service preferences.

bEnter a username. The name does not need to match a user account configured on the machine.

cEnter the password you want the user to use when logging on to the monitoring service.

dReenter the password.

The user appears in the Authorized Users list.

11Add other users if needed, then click Save to save the changes or Cancel to cancel the changes.

12Click another tab to configure more settings or click Close to close the 3WXM Services Setup dialog box.

Changing WX

The WX connection settings control the timeout and retries for

Connection

connections with monitored WX switches, and the types of certificates

Settings

the service will accept from the WX switches.

1Select Tools > 3WXM Services Setup. The 3WXM Services Setup dialog box appears. (See Figure on page 480.)

2Click the WXs Connection Settings tab.

3To change the number of seconds 3WXM Services waits for a TCP connection with a WX switch to reach the Connect stage, type or select the value in the Connect Timeout box. You can specify from 1 to 30 seconds. The default is 15 seconds.

Page 487
Image 487
HP Manager Software manual Changing WX, Connection, WX connection settings control the timeout and retries for