A

USING 3WXM WITH HP

 

 

OPENVIEW

If you installed the HP OpenView plug-in during installation of 3Com Wireless LAN Switch Manager (3WXM), you can use HP OpenView in conjunction with 3WXM to manage the 3Com Mobility System. This chapter discusses preparing to use HP OpenView and 3WXM, and starting 3WXM from the Network Node Manager.

Preparing to Use HP OpenView and 3WXM

Before using HP OpenView and 3WXM, make sure you have the following configured:

„SNMP trap receivers (See “Configuring SNMP” on page 208.)

„Syslog servers (See “Configuring Logging” on page 215.)

Starting 3WXM

You can start 3WXM directly from the main Network Node Manager

from Network Node

window.

Manager

To start 3WXM from Network Node Manager:

 

1Start Network Node Manager. The Network Node Manager window appears.

2In the main Network Node Manager window, do one of the following:

„Select Tools > 3Com > 3WXM.

„Click the 3Com icon in the toolbar.

„Right-click a 3Com WX switch, and select 3WXM.

The main 3WXM window appears.

Page 463
Image 463
HP Manager Software Preparing to Use HP OpenView and 3WXM, From Network Node, To start 3WXM from Network Node Manager