HP Manager Software manual Requirements for, Monitoring, Accessing, Monitored Data

354CHAPTER 10: MONITORING THE NETWORK

	The 3WXM service is configured to provide data for the Explore and
	Status Summary windows by default. To provide data to the client and RF
	windows, you must enable the service to poll WX switches for client and
	RF data. You also can enable the service to receive SNMP traps generated
	by the WX switches. (See “Changing Monitoring Settings” on page 489.)
Requirements for	To enable the 3WXm service to monitor network data, you or the 3WXM
Monitoring	services administrator must specify the WX switches to monitor. The
	3WXM service collects data from the switches and updates the
	information in the windows of the Monitor tab on 3WXM clients.
	To specify the WX switches to monitor, you upload their configuration
	into 3WXM or add them to the network plan. In addition, SNMP traps
	must be enabled on the WX switches.
	By default, the 3WXM service supplies data to all of the windows within
	the Monitoring tab. This data is refreshed at regular intervals, according
	to the polling interval configured for the 3WXM service. The default
	polling interval is 5 minutes.
	You can optionally disable the 3WXM service from supplying data to
	specified windows. To configure the 3WXM service for monitoring, see
	“Changing Monitoring Settings” on page 489. To enable SNMP traps on
	WX switches, see ““Configuring SNMP” on page 208:
Accessing	Data provided by 3WXM service is displayed in the Monitor tab in the
Monitored Data	Content panel. To access the data, 3WXM client must have a connection
	with the host running the 3WXM service.

To access monitored data

1Enable the 3WXM client to access the 3WXM service, if you have not already done so.

2Select an object in the Organizer panel.