HP Manager Software manual Deploying WX, Switches from a, Network Plan to

Deploying WX switches from a Network Plan to the Network 339

Deploying WX	To deploy the WX switches configured in a network plan, select
switches from a	Manage > Deploy from the toolbar in the main 3WXM window. The
Network Plan to	Deploy Configurations dialog box is displayed.
the Network	This dialog box is also accessible from the Managed Devices tab, and is
	displayed when you click Deploy on that tab.
To deploy network	To deploy network plan changes to the network, use the following
plan changes to the	procedure.
network

1Select one or more WX switches.

To select multiple WX switches, press Shift (for contiguous WX switches) or Control (for noncontiguous WX switches) while clicking.

2In the Local Changes group box, click Deploy. The Deploy Configurations dialog box appears.

The dialog lists the WX switches that have configuration changes.

To deploy WX To deploy WX switches from a network plan to the network, use the switches from a following procedure.

network plan to the network

1Select the WX switches to which you want to deploy the changes.

To select more than one WX, click Shift while clicking to select contiguous items, or click Ctrl while clicking to select noncontiguous items.

2Click Deploy Now.

The deployment status for each affected WX is shown on the History tab at the bottom of the dialog box.

If errors occur, click Selected Errors to view the errors. If there are errors, fix them and verify the changes before trying to deploy again. (You can use the Verification tab to fix the errors. See “Verifying Configuration Information” on page 327.)

If the deploy is successful, 3WXM also instructs the WX switch to save the changes in its configuration file.

3Click Close to return to the Managed Devices tab.