HP Manager Software manual Applying the RF Measurements to Floor Plan

458CHAPTER 13: OPTIMIZING A NETWORK PLAN

„If the number is greater than 0, 3WXM successfully imported measurements.

„If the number is 0, no measurements were imported. Try the import again. If you are using a site survey file, verify that the map name is correct.

Applying the RF

Measurements to the

Floor Plan

1On the Optimize RF Coverage page of the Building wizard, click Optimize.

A wizard appears, listing the progress of the request.

„The Total number of RF measurements that did not intersect any object line lists the number of measurements that did not experience attenuation due to an RF obstacle in the path between them.

If the measurements came from a site survey file, they are measurements between the portable AP (LOS point) and the PC running the site survey tool. If the measurements came from MAP radios in the network, they are measurements between MAP radios.

„The Total number of objects that will be corrected line indicates the number of measurements that did experience attenuation. For existing RF objects, 3WXM corrects the attenuation to match the results. If the floor plan does not have an RF obstacle where the attenuation library indicates one exists, 3WXM creates an RF obstacle.

For RF obstacles created by 3WXM, the description is auto-generatedand the obstacle type is Other. You can edit these values by selecting the obstacle, clicking the Edit properties icon to open the Modify RF Obstacle wizard, and modifying the values. Click Finish to close the wizard and save the changes. (See “To use the Create RF Obstacle Dialog box” on page 132. The wizard is the same whether it is labeled Create or Modify.)

2Click Finish.