HP Manager Software manual Accounting

Configuring and Managing Access Rules for Network Users 297

„Pass-Through — No protocol is used by the WX. 3Com Mobility System Software (MSS) sends the EAP processing to a RADIUS server.

If you select PEAP, the EAP Sub-Protocol is MS-CHAPV2. For other protocols, the EAP Sub-Protocol is None.

8To select the authentication method, click Choose Available, then select the method from the list:

„RADIUS server group — A server group that you have configured previously.

„LOCAL — The WX switch’s local database.

You can add one or both methods to the list.

„If you specify a RADIUS server group as the first method and a user is denied access by the RADIUS server, no authentication and authorization are attempted with the other methods specified in the list.

„If you specify LOCAL as the first method and a user is not in the local user database on the WX, authentication and authorization are attempted with a RADIUS server group if one is defined in the method list.

The method you select for authentication is also used for authorization.

To add a server group, click Create and go to “To define a RADIUS server group” on page 268. After you create the server group, click Choose Available and then select the server group from the list.

9Do one of the following:

„To configure accounting, go to “To configure accounting settings, follow these steps.”.

„To save changes and close the wizard, click Finish.

Configuring To configure accounting settings, follow these steps.

Accounting

1Click Accounting at the top of the wizard to display the following page. (The page contents are the same for 802.1X, MAC, last-resort, and WebAAA.)

2To enable this accounting rule for the SSID, select Enabled. By default, a rule you configure in 3WXM is disabled, which means 3WXM does not add the rule to a WX switch’s configuration.