Synchronizing Local and Network Changes 337

To undo changes

1Select one or more WX switches.

To select multiple WX switches, press Shift (for contiguous WX switches) or Control (for noncontiguous WX switches) while clicking.

2Do one of the following:

„To undo local changes, click Undo in the Local Changes group box.

„To undo network changes, click Undo in the Network Changes group box.

The status is shown in the Network Status and Local Status columns.

Synchronizing When If a WX switch in the network has configuration changes, and the the Network and switch’s counterpart in the network plan also has changes but the

3WXM Have changes are different, you still can synchronize the changes.

Nonmatching

Changes The Managed Devices tab indicates that both the network and the network plan have nonmatching changes in the following ways:

„When you select the WX switch, the buttons in both the Local Changes and Network Changes group boxes become active.

„If you click Deploy, the deploy is not performed and the following message is displayed instead: wx is not synchronized.

To synchronize the changes, do one of the following:

„Review and either deploy (local changes) or accept (network changes) the changes, then review and either deploy or accept the other set of changes.

„Reject one set of changes (local or network) and accept or deploy the other set of changes.

„Reject both sets of changes.

Modifying By default, 3WXM client polls WX switches in the network every 15 Configuration minutes for network changes, and displays a popup message if changes Change Polling are detected. The popup message is in addition to notification in the

Options Alerts panel.

Page 337
Image 337
HP Manager Software manual To undo changes, Nonmatching, Options Alerts panel