HP Manager Software manual Click the Monitoring Settings tab

490CHAPTER C: CHANGING 3WXM SERVICES PREFERENCES

The data for some reports also requires monitoring options to be enabled. For information, see the descriptions for each report in “Generating Reports” on page 437.

To change To change monitoring settings, use the following procedure. monitoring settings

1Select Tools > 3WXM Services Setup. The 3WXM Services Setup dialog box appears. (See Figure on page 480.)

2Click the Monitoring Settings tab.

3To change the number of minutes between status queries from 3WXM Services to the WX switches it monitors, change the value in the Polling interval box. You can specify from 1 to 60 minutes. The default is 5 minutes.

4To change settings for monitoring of the log buffers on WX switches: a Select Enable log monitoring. This option is enabled by default.

b To change the number of minutes between queries of the WX switches’ log buffers, change the value in the Polling interval box. You can specify from 1 to 60 minutes. The default is 5 minutes.

c To change the maximum number of log entries 3WXM Services stores for an individual WX switch, change the value in the entries per WX box. You can specify from 1000 to 5000 entries, in increments of 100. The default is 1000 entries.

5To enable data collection for client sessions, select Enable client session collection. This option is disabled by default.

The Polling Interval is 5 minutes and cannot be changed.

6To enable RF data collection, select Enable RF trending. This option is enabled by default.

The Polling Interval is 5 minutes and cannot be changed.