HP Manager Software manual Toolbar Options on Managed Devices Tab, OptionDescription

334CHAPTER 8: MANAGING WX SYSTEM IMAGES AND CONFIGURATIONS

„Deploy — Send the configuration changes to the same WX switch in the network.

„Undo — Remove the changes from the WX switch in the network plan.

„For network changes:

„Review — Display the configuration changes that have occurred in the network for the selected WX switch.

„Accept — Update the WX switch in the network plan with the changes from the live WX switch.

„Undo — Remove the changes from the WX switch in the network.

When you are deploying changes to a WX, all of the changes are sent as a single transaction. If any parameter is unsuccessfully changed, the entire transaction is rolled back. If the transaction is successful, the configuration changes are immediately and dynamically put into effect (a reboot is not required). These changes can be temporary, or you can save the configuration changes in the current configuration file (found in the WX nonvolatile storage), so that these changes are preserved across WX resets.

If you configured the WX to update its image through the selection of a local software image (as described in “Configuring Basic WX Properties” on page 188), then the deploy function also simultaneously downloads and installs the specified image. If the image update option is used, the WX automatically resets in order to run the updated image. As a best practice, use the image repository to associate images with WX switches. This allows you to deploy compatible versions of an image and configuration if necessary.

Toolbar Options Table 29 lists the options on the Managed Devices tab’s toolbar.

Table 29 Toolbar Options on Managed Devices Tab

OptionDescription

Refresh Refreshes the data.