Connecting the PA600 to a PC
Connect the PA600 to a PC with the USB Cable through the following:
NOTE: Connect the PA600 with an external power supply while synchronizing.
1.Press and hold the USB Charging Cable’s Release Buttons while connecting to the PA600 (1).
2.Connect the USB Charging Cable to the PC/Notebook’s USB Port and plug the AC Adapter Cable into the USB Charging Cable’s power jack (2).
3.Plug the other end of the AC Adapter into an electrical outlet (3).
2
3
1
10
Copyright 2008 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
