Mounting
Removing the Wiring Terminals Cover
Before mounting, you must remove the wiring terminals cover to access the mounting holes and the wiring terminals. The wiring terminals cover is secured with two Phillips
xantrex
Remove screws to access the
Figure 4-2 Removing the Wiring Terminals Cover
Removing Knockouts
Six dual and two single knockouts are provided for routing battery, PV array, BTS, and network cables into the XW Solar Charge Controller. Bushings or conduits must be used to protect the wiring from damage from rough edges around the knockout holes.
Side screws for power distributionKeyhole slot for wall mounting
panel mounting
2 7/8"
(73 mm)
|
| 12 ¾" |
11" |
| (323 mm) |
|
| |
(280 mm) | 14 ½" |
|
|
| |
| (368 mm) | Additional |
|
| |
|
| mounting holes |
| ¼" |
|
| (6.35 mm) |
|
2 3/8" |
| 2 1/16" |
(60 mm) |
| |
| (53 mm) | |
|
| |
1" | 9/16" | 4 5/8" |
(25.4 mm) | (118 mm) | |
| (14 mm) | 5 ¾" |
5 7/16" |
| |
| (146 mm) | |
(138 mm) |
| |
|
|
