Xantrex Technology XW4024-120/240-60, XW4548-120/240-60, XW6048-120/240-60 Installation Steps

Step 5: Installing Additional Inverters

Step 5: Installing Additional Inverters

Installation Steps

To install multiple inverters:

1.Disconnect all power from the system.

2.Mount additional inverter(s). See “Step 1: Installing the Mounting Plate” on page 2–4

and “Step 2: Mounting the Inverter” on page 2–6.

3.Install the XW Conduit Box. See “Step 3: Mounting the XW Power Distribution Panel and XW Conduit Box” on page 2–7.

4.Install AC sync cable(s) as required. See “Xanbus and AC Sync Cable” on page 2–38.

5.Install a XW System Control Panel to configure programmable settings and to name specific network components (e.g., XW1, XW2 etc.). See “The XW System Control Panel” on page 5–2.

6.Convert the XW Power Distribution Panel to accommodate the extra inverter by installing the additional breakers and components. See page 2–30 for instructions on converting the XW Power Distribution Panel to a dual-inverter configuration. See page 2–34 for converting the XW Power Distribution Panel to a triple-inverter configuration.

7.Attach Bypass interlock plate to distribution panel cover.

8.Connect DC wiring. See Figure 2-24 on page 2–31 for dual-inverter configurations and Figure 2-27 on page 2–35 for triple-inverter configurations.

9.Connect AC wiring. See Figure 2-26 on page 2–33 for dual-inverter configurations. For triple-inverter Configurations, see Figure 2-28, “Triple-Inverter AC Breaker Arrangement and Wiring Enlargement with Multiple AC Input Sources” on page 2–36 or Figure 2-29, “Triple-Inverter AC Breaker Arrangement and Wiring Enlargement with a Single AC Input Source” on page 2–37.

975-0239-01-01 2–29