Quick Start Guide
Quick Start Guide
For descriptive purposes, this Quick Start Guide considers a typical configuration consisting of a PC connected via an Ethernet LAN to a
Hardware Setup
Figure
Step 1: Connect the Serial Server to the network using a standard network cable.
Step 2: Connect the Serial Server to the
NOTE: If the serial device is configured as a DCE, use a
Step 3: Set the Run/Console DIP switch to the Run position.
Step 4: Apply power to the Serial Server.
Software Installation
Using the CD included with the serial server, install the Serial Server Manager software on the configuring computer.
Serial Server Configuration
Step 1: Open the Serial Server Manager software. It will automatically search for any reachable Serial Servers. A list of all Serial Servers connected to the LAN will appear in the Serial Server List window.
Step 2:
Page 7 |