Black Box LES402A, LES404A, LES401A manual Software Setup, Using Serial Server Manager, Page

Chapter 5: Using Serial Server Manager

NOTE: If connecting directly to a computer LAN card, use an Ethernet Crossover Cable (as in Figure 5-2).

Figure 5-2. Direct Ethernet connection using a crossover cable.

Step 2: Apply power. The red Power indicator will light. The Link indicator lights when an Ethernet connection is made, and the Ready indicator will flash.

5.2 Software Setup

Step 3. To run the Serial Server Manager from the Windows Desktop, click:

“Start —> Programs —> Serial Server”

As soon as the Serial Server Manager opens, it will initiate Searching Server and after a few seconds, the Serial Server List will display all Serial Servers on the network.

Figure 5-3. The Serial Server Manager window.

Page 28 724-746-5500 blackbox.com