Technics Technical Specifications for CD Players and Amplifiers under DIN 45 500 Standards

Technical specifications (DIN 45 500)

TUNER

■Pre-amplifier section Input sensitivity/impedance

EXT/MD IN	300 mV/15 kΩ
Output level/impedance
EXT/MD OUT	250 mV/1.5 kΩ
■ Tuner section
FM frequency range	87.50–108.00 MHz
	(0.05 MHz step)
FM antenna terminal	75 Ω unbalance

AM frequency range

522–1629 kHz (9 kHz step) 520–1630 kHz (10 kHz step)

■Timer section

Clock	Quartz lock type
Function	Play timer: 1 time or everyday
	Rec timer: 1 time or everyday

Sleep timer: 120 min, 30 min intervals

■GENERAL Dimensions (W×H×D)

	196×76.8×250 mm
Weight	1.0 kg

AMPLIFIER SC-HD510■ Amplifier section

(Low frequency side) Power output

DIN 1 kHz, THD 1%, 6 Ω both

channel driven	2×12 W
RMS 1 kHz, THD 10%, 6 Ω both
channel driven	2×15 W
Total harmonic distortion
Half power, 1 kHz, 6 Ω	0.09%
S/N	75 dB
Load impedance	6 Ω
■ Amplifier section
(High frequency side)
Power output
DIN 10 kHz, THD 1%, 6 Ω both
channel driven	2×5 W
RMS 10 kHz, THD 10%, 6 Ω both
channel driven	2×8 W
S/N	75 dB
Load impedance	6 Ω
■ Headphones
Jack type	3.5 mm STEREO
Load impedance	16–32 Ω

■General Power supply

For United Kingdom, Australia and N.Z.

AC 230–240 V, 50 Hz
For others	AC 230 V, 50 Hz
Power consumption	73 W
STANDBY condition
Normal	9 W
Eco	0.8 W
Dimensions (W×H×D)
196×105.8×259.9 mm
Weight	3.3 kg

AMPLIFIER SC-HD310

■Amplifier section

Power output

DIN 1 kHz, THD 1%, 6 Ω both

channel driven	2×17 W
RMS 1 kHz, THD 10%, 6 Ω both
channel driven	2×20 W
Total harmonic distortion
Half power, 1 kHz, 6 Ω	0.09 %
Frequency response
50 Hz–20 kHz (+1 dB, –3 dB)
S/N	75 dB
Load impedance	6 Ω
■ Headphones
Jack type	3.5 mm STEREO
Load impedance	16–32 Ω
■ General
Power supply
For United Kingdom
AC 230–240 V, 50 Hz
For others	AC 230 V, 50 Hz
Power consumption	67 W
STANDBY condition
Normal	9 W
Eco	0.8 W
Dimensions (W×H×D)
196×105.8×259.9 mm
Weight	2.8 kg

CD PLAYER

Digital output terminal	Optical×1
■ Audio section
DA converter	1 bit 2 DAC MASH
■ Format
Sampling frequency	44.1 kHz
■ Pickup
Wavelength	780 nm

■General Dimensions (W×H×D)

	196×76.8×243.1 mm
Weight	1.2 kg

CASSETTE DECK

■Audio section

Track system 4 track 2 channel STEREO

Frequency response (Dolby NR off)

(Rec/Play)
TYPE 1 (NORMAL)	30 Hz–16 kHz (DIN)
TYPE 2 (HIGH)	30 Hz–16 kHz (DIN)
TYPE 4 (METAL)	30 Hz–16 kHz (DIN)
S/N (Signal level=max recording level,
TYPE 2)
NR off	56 dB (A weighted)
Dolby B NR	64 dB (A weighted)
■ Motor
Capstan drive	DC servo motor
Reel table drive	DC motor
Fast forward and rewind time (C-60)
	Approx. 52 seconds
Wow and flutter	0.1% (WRMS)

■General Dimensions (W×H×D)

	196×105.8×236.1 mm
Weight	1.5 kg

SPEAKER SYSTEM SC-HD510

Type 2 way, 2 speaker, bass-reflex system

Speaker(s)
Woofer:	12 cm cone type
Tweeter:	6 cm semi-dome type
Impedance	6 Ω
Input power
High	30 W (Music), 15 W (DIN)
LOW	60 W (Music), 30 W (DIN)

Output sound pressure level

85 dB/W (1.0 m)

Cross over frequency5 kHz Frequency range 43 Hz–50 kHz (–16 dB)

50 Hz–45 kHz (–10 dB)

■General Dimensions (W×H×D)

For Australia and N.Z.

	155×334×240 mm
For others	155×334×252 mm
Weight
For Australia and N.Z.		3.1 kg
For others		3.5 kg

SPEAKER SYSTEM SC-HD310

Type 2 way, 2 speaker, bass-reflex system

Speaker(s)
Woofer:	12 cm cone type
Tweeter:	6 cm cone type
Impedance	6 Ω
Input power	60 W (Music), 30 W (DIN)

Output sound pressure level

85 dB/W (1.0 m)

Cross over frequency6 kHz Frequency range 45 Hz–25 kHz (–16 dB)

55 Hz–22 kHz (–10 dB)

■General Dimensions (W×H×D)

	160×319×217 mm
Weight	3.0 kg

Notes:

1.Specifications are subject to change without notice.

Weight and dimensions are approximate.

2.Total harmonic distortion is measured by the digital spectrum analyzer.

Matsushita Electric Industrial Co., Ltd.	En
Osaka 542-8588, Japan	RQT5296-B

H1299YY0(D)