Technics SC-HD510 Press SLEEP to select the time minutes, Timer operations, Using the timers

Timer operations

24

RQT5296

A	[	PLAY/	REC] indicator
	CLOCK/TIMER, –DEMO
	CLOCK/TIMER

– DEMO

B

SLEEP		SLEEP	PLAY	REC
1		2	3
				>10
4		5	6
7		8	9	0
	PROGRAM			CANCEL
	RANDOM			REPEAT
				AUTO/
				MONO
	MD
	CD	TAPE	EXT/MD	TUNER

SLEEP

SLEEP

Using the timers

AThe play and record timers

Checking the timers

Press [CLOCK/TIMER, –DEMO] to select “	PLAY” (or “ REC”)
The timer conditions are shown in the following order:
Day → start time → finish time → source → (“	PLAY” only) volume

The timers can be checked even if the unit is off.

Playing the unit after the timers are set

The unit can be used after the timers are set. Make sure the unit is off before the set start time.

Note

●If the unit is turned off while a timer is functioning, the finish time setting will not be activated.

● The timers (either one or both) are set when the [	PLAY/
REC] indicator is on.

BThe sleep timer

Remote control only

This timer turns the unit off after a set time.

While playing a source

Press [SLEEP] to select the time (minutes).

Each time you press the button:

SLEEP 30 SLEEP 60 SLEEP 90

SLEEP OFF SLEEP 120

To cancel the sleep timer

Press [SLEEP] to select “SLEEP OFF.” “SLEEP” goes out.

To confirm the remaining time

(While the timer is functioning) Press [SLEEP].

The remaining time is shown for about five seconds.

To change the setting

Press [SLEEP] to display the remaining time, then press again to select the required time.

Note

The sleep timer is canceled if one touch editing is started.

Using the timers together

Any of the timers can be used together, but ensure the unit is off before the start time for the record and play timers.