Basic connections for supplied accessories
ABefore connection
● Do not connect the AC mains lead until all other connections are complete.
● To prepare the AM loop antenna, FM antenna (for Australia and N.Z.) and speaker cables, twist the vinyl tip and pull off (a).
● Disconnect the flat cable on the cassette deck (b).
1 Flat cables.
Keep the cables as flat as possible against the back of the unit.
2 FM antenna.
Fix the other end of the antenna where reception is best.
3 AM loop antenna.
Keep loose antenna cord away from other wires and cords.
4 Speaker cables.
Connect the cables to the terminals of the same color. Never allow the exposed wires to contact each other when connected.
Use only the supplied speakers.
The combination of the system and the front speakers provides the best sound. Using other speakers can damage the unit and sound quality will be negatively affected.
(United Kingdom only)
BE SURE TO READ THE CAUTION FOR THE AC MAINS LEAD ON PAGE 4 BEFORE PROCEEDING TO STEP 5.
5 Connect the AC mains lead.
Insertion of connector
Even when the connector is perfectly inserted, depending on the type of inlet used, the front part of the connector may jut out as shown in the drawing.
However there is no problem using the unit.
Connector
Approx. 6 mm
Appliance inlet
For your reference
Information you enter into the unit’s memory, except for time, remains intact for up to two weeks after the mains lead is disconnected.
Note
The included AC mains lead is for use with this unit only. Do not use it with other equipment.
Before use
7
RQT5296
