Nortel Networks 2300 Series manual Set service-profile cipher-wep40, Set service-profile cos

AP Commands 325

set service-profile cipher-wep40

Enables dynamic Wired Equivalent Privacy (WEP) with 40-bit keys, in a service profile.

Syntax set service-profile name cipher-wep40 {enable disable}

name	Service profile name.
enable	Enables 40-bit WEP encryption for WPA clients.
disable	Disables 40-bit WEP encryption for WPA clients.

Defaults 40-bit WEP encryption is disabled by default.

Access Enabled.

History Introduced in WSS Software Version 3.0.

Usage To use 40-bit WEP with WPA clients, you must also enable the WPA IE.

When 40-bit WEP in WPA is enabled in the service profile, radios managed by a radio profile that is mapped to the service profile can also support non-WPA clients that use dynamic WEP.

To support WPA clients that use 104-bit dynamic WEP, you must enable WEP with 104-bit keys in the service profile. Use the set service-profilecipher-wep104command.

Microsoft Windows XP does not support WEP with WPA. To configure a service profile to provide dynamic WEP for XP clients, leave WPA disabled and use the set service-profile wep commands.

To support non-WPA clients that use static WEP, you must configure static WEP keys. Use the set service-profile wep key-indexcommand.

Examples The following command configures service profile sp2 to use 40-bit WEP encryption:

WSS# set service-profile sp2 cipher-wep40 enable

success: change accepted.

See Also

•set service-profilecipher-ccmp on page 312

•set service-profilecipher-tkip on page 313

•set service-profilecipher-wep104 on page 314

•set service-profile wep key-index on page 342

•set service-profilewpa-ie on page 342

•show service-profile on page 380

set service-profile cos

Sets the Class-of-Service (CoS) level for static CoS.

Nortel WLAN—Security Switch 2300 Series Command Line Reference