Useful Information
Error messages
If the unit detects a problem, one of the following messages is shown on the display.
Display message | Cause/solution |
Busy | L The called unit is in use. |
| L Other units are in use and the system is busy. Try again |
| later. |
| L The handset you are using is too far from the base unit. |
| Move closer and try again. |
| L The handset’s registration may have been canceled. Re- |
| register the handset (page 27). |
Check tel line | L The supplied telephone line cord has not been connected |
| yet or not connected properly. Check the connections |
| (page 8). |
Error!! | L Recording was too short. Try again. |
Failed | L Phonebook copy failed (page 19). Confirm the other unit |
| (the receiver) is in standby mode and try again. |
Incomplete | L Phonebook copy is incomplete. The receiver’s phonebook |
| memory is full. Erase the unnecessary phonebook entries |
| (page 17) from the other unit (the receiver) and try again. |
Memory full | L The phonebook memory is full. Erase unnecessary |
| entries (page 17). |
| L Message memory is full. Erase unnecessary messages |
| (page 32, 33). |
Messages full | L Message memory is full. Erase unnecessary messages |
| (page 32, 33). |
No link. Reconnect base AC | L The handset has lost communication with the base unit. |
adaptor. | Move closer to the base unit and try again. |
| L Unplug the base unit’s AC adaptor to reset the unit. |
| Reconnect the adaptor and try again. |
| L The handset’s registration may have been canceled. Re- |
| register the handset (page 27). |
Requires subscription to | L You must subscribe to a Caller ID service. Once you |
Caller ID. | receive caller information after subscribing to a Caller ID |
| service, this message will not be displayed. |
Use rechargeable battery. | L A wrong type of battery such as Alkaline or Manganese |
| was inserted. Use only the rechargeable |
| noted on page 4, 5. |
For assistance, please visit http://www.panasonic.com/help | 41 |
