Programming
*1 If you program these settings using one of the handsets, you do not need to program the same item using another unit.
Programming using the direct commands
1{MENU} i{#}
2Enter the desired feature code.
3{V}/{^}: Select the desired setting. i{SAVE}
L This step may vary depending on the feature being programmed.
L To exit the operation, press {■}(EXIT) on the base unit or {OFF} on the handset.
Note:
L The operating unit column shows the unit(s) that can be used to program the item. =: Only the base unit can program the item.
Y: Only the handset can program the item.
=/Y: Both the base unit and handset can program the item. L In the following table, < > indicates the default settings.
Operating | Feature | Feature | Setting | System | Page |
unit |
| code |
| setting*1 |
|
Y | Alarm | {7}{2}{0} | <Off> | – | 25 |
|
|
| Once |
|
|
|
|
| Daily |
|
|
Y | Answer off | {3}{2}{8} | – | r | 31 |
Y | Answer on | {3}{2}{7} | – | r | 31 |
Y | Auto talk*2 | {2}{0}{0} | On | – | 14 |
|
|
| <Off> |
|
|
=/Y | Block w/o num. | {2}{4}{0} | On | r | 26 |
| (Block calls without |
| <Off> |
|
|
| phone number) |
|
|
|
|
=/Y | Call block | {2}{1}{7} | – | r | 26 |
=/Y | Caller ID edit | {2}{1}{4} | <On> | – | 29 |
| (Caller ID number auto |
| Off |
|
|
| edit) |
|
|
|
|
=/Y | Caller list | {2}{1}{3} | – | – | 28 |
Y | Check greeting | {3}{0}{3} | – | – | 32 |
=/Y | Customer support*3 | {6}{8}{0} | – | – | – |
Y | Date and time | {1}{0}{1} | – | r | 12 |
Y | Deregistration | {1}{3}{1} | – | – | 27 |
= | Display language | {1}{1}{0} | <English> | – | 12 |
Y | Display |
| Español |
|
|
| (Change language) |
|
|
|
|
Y | Erase all msg. | {3}{2}{5} | – | r | 33 |
| (msg.: messages) |
|
|
|
|
Y | Intercom | {2}{7}{4} | – | – | 38 |
Y | Key tone*4 | {1}{6}{5} | <On> | – | – |
|
|
| Off |
|
|
=/Y | LCD contrast | {1}{4}{5} | Level | – | – |
| (Display contrast) |
|
|
|
|
|
|
|
|
|
|
22 | For assistance, please visit http://www.panasonic.com/help |
