Panasonic KX-TG1062 Programmable settings, Programming by scrolling through the display menus

Programming

Programmable settings

You can customize the unit by programming the following features.

To access the features, there are 2 methods:

–scrolling through the display menus (page 20)

–using the direct commands (page 22)

L Direct command is the main method used in these operating instructions.

Programming by scrolling through the display menus

=Base unit / YHandset

1{MENU}

2Press {V} or {^} to select the desired main menu. i{SELECT}

3Press {V} or {^} to select the desired item in sub-menu 1. i{SELECT} L In some cases, you may need to select from sub-menu 2. i{SELECT}

4Press {V} or {^} to select the desired setting. i{SAVE}

L This step may vary depending on the feature being programmed.

L To exit the operation, press {■} (EXIT) on the base unit or {OFF} on the handset.

Note:

L See page 22 for the default settings.

Base unit

Main menu	Sub-menu 1	Sub-menu 2	Page
Caller list	–	–	28
W
Set answering	Screen call	–	31
s
Initial setting	Ringer setting	Ringer volume	14
"		Ringer tone	–
		Silent mode	25
		– On / Off
		– Start / End
	Call block*1	–	26
	LCD contrast	–	–
	Caller ID edit	–	29
	Display language	–	12
Customer support	–	–	–
!

*1 If you program these settings using the base unit, you do not need to program the same item using a handset.

20 For assistance, please visit http://www.panasonic.com/help