Making/Answering Calls
Making calls
Using the base unit =
1Dial the phone number.
L To correct a digit, press {CLEAR}.
2Lift the corded handset.
3When you finish talking, place the corded handset on the cradle.
Note:
L You can also dial the phone number after lifting the corded handset.
Using the speakerphone
1During a conversation with the corded handset, press
L You can place the corded handset on the cradle.
L Speak into the base unit microphone. L Speak alternately with the other party.
2When you finish talking, press
Note:
LFor best performance, use the speakerphone in a quiet environment.
L To switch to the receiver, lift the corded handset.
Using the handset Y
1Lift the handset and dial the phone number. L To correct a digit, press {CLEAR}.
2{C}
3When you finish talking, press {OFF} or place the handset on the charger.
Using the speakerphone
1During a conversation, press {s} to turn on the speakerphone.
L Speak alternately with the other party.
2When you finish talking, press {OFF}.
Note:
LFor best performance, use the speakerphone in a quiet environment.
L To switch to the receiver, press {C}.
Adjusting the receiver or speaker volume
=Base unit / YHandset
Press {^} or {V} repeatedly while talking.
Making a call using the redial list
The last 10 phone numbers dialed are stored in the redial list in each unit (each 48 digits max.).
=Base unit / YHandset
1{REDIAL}
2{V}/{^}: Select the desired phone number.
3Proceed with the operation for your unit. Base unit: Lift the corded handset. Handset: {C}
Erasing a number in the redial list
1{REDIAL}
2{V}/{^}: Select the desired phone number. i{ERASE} (soft key)
3{V}/{^}: “Yes” i{SELECT}
4Proceed with the operation for your unit. Base unit: {■} (EXIT)
Handset: {OFF}
Pause (for PBX/long distance service users)
A pause is sometimes required when making calls using a PBX or long distance service. When storing a calling card access number and/or PIN in the phonebook, a pause is also needed (page 18).
=Base unit / YHandset
Example: If you need to dial the line access number “9” when making outside calls with a PBX:
1{9} i{PAUSE}
2Dial the phone number.
3Proceed with the operation for your unit. Base unit: Lift the corded handset. Handset: {C}
Note:
L A 3.5 second pause is inserted each time {PAUSE} is pressed. Repeat as needed to create longer pauses.
For assistance, please visit http://www.panasonic.com/help | 13 |
