adpu160m.sys Error Messages
The following error messages are listed sequentially according to the last three digits of the error message. For example, [xxxxx010], [xxxxx011], [xxxxx012], etc.
NOTE When reporting problems to HP Customer Support, be sure to include
the complete error message in your problem description.
[xxxxx004] Command completed with error
[xxxxx005] Command completed with error
[xxxxx006] Command completed with error
A request issued to a target device completed with indication that there is an error. In most cases, the error is recovered and normal operations continues.
[xxxxx010] Error issuing command
An error has occurred while the driver was setting up its internal data structures.
[xxxxx011] Error issuing command
The requested command is not supported by this driver.
[xxxxx012] Error issuing command
[xxxxxx99] Error issuing command
The driver does not recognize the target device.
[xxxxx021] Target device protocol error
An unexpected event occurred during data transfer between the adapter and target device. Normally, this indicates a faulty or
[xxxxx022] Adapter or target device protocol error
The adapter or target device has broken the communication protocol. A badly behaving device could cause this message to appear. Normally this is not a serious problem. If you get this message frequently over a short period of time,
33
