HP Part Number | HP NetServer 5971-0821 instruction

HP Netserver

Ultra3 SCSI Host Bus Adapter

Installation and Configuration

Guide

HP Part Number 5971-0821

Printed in November 2000

Image 1

HP NetServer 5971-0821 manual HP Part Number

Contents

HP Part Number Audience Assumptions Contents Novell NetWare Installation Microsoft Windows 2000 Installation SCO UnixWare Installation SCO OpenServer InstallationLinux Support Product Specifications Troubleshooting 101 Regulatory Information 103 Warranty and Support 109Index 111 HP Ultra3 Single Channel Scsi Host Bus Adapter Installation and Setup Primary and Secondary Bus Segments Bus Segments on the HP Ultra3 Scsi Host Adapter Bit and 64-bit Expansion Slots Installing the HP Ultra3 Scsi Host Bus Adapter Host Bus Adapter Installed in 64-bit Slot Choosing Scsi Cables Setting Up Scsi DevicesCheck the Scsi IDs Terminate the EndsPage Connecting the Scsi Host Adapter to the Common Tray Connecting Scsi Devices Common Tray Cable Connection Connecting the Scsi Host Adapter to a Hot-Plug Cage Hot-Plug Cage Cable Connections Connecting Ultra/Fast Wide Scsi Devices Connecting Ultra/Fast Wide Scsi Devices Connecting Internal Ultra/Fast Narrow Devices Connecting Ultra/Fast Narrow Devices Connecting External Scsi Devices 10. Connecting External Scsi Devices Preloaded Ultra3 Drivers HP Ultra3 Scsi Host Adapter Driver SoftwareEmbedded Ultra3 Drivers Troubleshooting Boot Device Options Configuration with SCSISelectScsi Device Configuration Advanced Configuration Options SCSISelect Options Available Default SettingsStarting SCSISelect Exiting SCSISelect Using SCSISelect SettingsScsi Bus Interface Definitions Scsi Device Configuration Boot Device Options Advanced Configuration Options Page Page Using Scsi Disk Utilities Installing the Driver When Installing Windows NT Microsoft Windows NT InstallationAdaptec Ultra3 PCI Scsi Controller NT4.0 Completing a Fresh Windows NT 4.0 Installation From CD-ROM Installing the Driver When Windows NT is Already Installed Updating Windows NT Using Advanced Configuration Parameters Regdword Using Windows NT Scsi Parameters Using Driver-specific Parameters Page Type a\nt4\hotp160m.reg and press Enter Hot-Plug PCI Feature Removing a Host Adapter Using Windows NT and the Host Adapter Removing a Host Adapter in Windows NT Problems and Solutions Press spacebar NOW to invoke the Last Known Good menu Error Messages Xxxxx010 Error issuing command Adpu160m.sys Error MessagesXxxxx011 Error issuing command Xxxxx021 Target device protocol error Xxxxx024 Data overrun or underrun Xxxxx023 Target device parity errorXxxxx031 Target device queue full Xxxxx032 Target device busy Xxxxx0d6 Internal driver error Xxxxxd4 Adapter hardware failure adapter resetXxxxx097 Unable to allocate memory Xxxxx0ce Scatter/gather limit exceededPage Installing the Driver When Installing Windows Microsoft Windows 2000 InstallationPress any key to boot from CD Click the Control Panel Using Windows 2000 Scsi Parameters Regdword Regsz Troubleshooting Problems and Solutions Driver Error Messages Xxxxx021 Target device protocol error Xxxxx089 Unable to allocate memory Xxxxxd4 Adapter hardware failure adapter reset Page Installing the Driver When Installing NetWare Novell NetWare InstallationDownload the Nwpa Update Package NetWare 3.12/3.2 Lswap loader.exe \server.312\server.exe cd \server.312 Copy cdrom.nlm to c\server.312\cdsave Load c\server.312\adpt160m slot=2 NetWare 4.12/4.2 Select Save parameter and continue, and press Enter NetWare Install CD-ROM Drivers on a DOS Bootable Hard Disk DOS Drivers for CD-ROM AccessMkdir c\scsi Copy a\dos\*.* c\scsi Load pathnameadpt160m options Installing the Driver When NetWare is Already Installed Using the Load Command Line Options Loading the Driver at Server BootupLoad pathnameadpt160m.ham options Load c\nwserver\adpt160m verbose=y Option Values Default Description Adpt160m.ham Command Line Options Multluntargets= Binary Hex Bit Mask Options Sample Load Commands Using NetWare and the Host AdapterUsing Removable Media Load a\netware\adpt160m.ham Lock Status Mount Status Using a CD-ROM with NetWare Using the NetWare Tape BackupLoad pathnameadpt160m Scan all luns Optimizing PerformanceCd device list Cd mount x name Xxxxx081 Adapter software initialization failure Xxxxx080 Unable to allocate memoryPage Xxxxx0c9 Invalid command line parameter Xxxxx0a4 Scsi bus reset by third party hardwareXxxxx0ac Driver already loaded for all host bus adapters Xxxxx0a9 Possible interrupt conflictPage Installing the Driver When Installing SCO OpenServer SCO OpenServer InstallationInstalling SCO OpenServer When you see these prompts Umount /stand Name Description Logical Bus Adapter Device Unit Prefix Type Number Host Enter Using Multiple Host Adapters Using SCO OpenServer and the Host Adapter Changing the Boot Disk Setting ParametersUsing Wide Scsi Host Adapters and Devices Using Tunable Parameters for the ad160 Driver Enabling Scatter/Gather and Tagged Queuing Changing the Maximum Number of LUNs Supported My computer does not recognize my host adapter My computer does not recognize my Scsi devices Am having problems booting the computer from a Scsi drive Ad160 Sdsk My computer hangs during heavy system load activity My computer crashes or displays panic messages at boot time Type Y to rebuild the kernel environment Reboot the system Xxxxx0ca Cannot initialize device Page Installing the Driver When Installing UnixWare SCO UnixWare Installation Installing the Driver When UnixWare is Already Installed Load the Package Back Up the ComputerPkgadd -d diskette1 Rebuild the UnixWare Kernel Modify the New System FileType pkginfo -l adstxx and press Enter Cat /etc/conf/sdevice.d/adst21 Boot the New Kernel Using UnixWare and the Host AdapterCd /etc/conf/bin Idbuild -B Cd /etc/conf/cf.d cp unix /stand/unix cd Shutdown -g0 Removing the Driver Using Tunable ParametersEtc/conf/bin/idbuild -B Cp /etc/conf/cf.d/unix /stand/unix Etc/conf/bin/idinstall -d adst70 Etc/conf/bin/idinstall -d adst21 Troubleshooting Xxxxx011 Error issuing command Adapter was given more or less data than was expected Xxxxx046 Target device did not respond to abort sequence Xxxxx097 Unable to allocate memory Linux Operating System World Wide Web URL Linux SupportPage Electrical Product Specifications Environmental Physical Regulatory 100 Troubleshooting Checklist TroubleshootingCommon Error Messages Device connected, but not ready Time-out failure during … Start unit request failed102 Regulatory Notices Electromagnetic Compliance Regulatory InformationFederal Communications Commission Class B Equipment Class a Equipment Class a Accessories104 For products labeled as Class a For products labeled as Class B105 106 Class a Warning 107 108 Declaration of Conformity US, EU, Australia Hardware Accessories Limited Warranty Warranty and SupportHewlett-Packard Hardware Accessories 109 World Wide Web HP Repair and Telephone SupportThird-Party Hardware Products Canada 111 Index 112 113 114