HP NetServer 5971-0821 manual Multluntargets=

Option	Values	Default	Description
multlun_targets=	0-FFFF	FFFF	A bit mask to enable LUNs on
			selected targets. By default,
			LUNs on all targets are enabled.
			This bit mask is entered in hex
			(see “Bit Mask Options” on
			page 58).
slot=	0-xxxxb	0	Defines a physical slot number
			for the host adapter. If 0 is
			specified, or if this option is not
			specified, then the driver loads
			for all Ultra3 host adapters.
verbose=	yes, no	no	Displays host adapter
			configuration information at load
			time.

a.Many multiple-LUN and removable-media devices are changers or magazines. Some of these are only supported by the driver through an ASPI driver provided by the hardware vendor.

b.The values can vary and are dependent on the system configuration.

57