HP NetServer 5971-0821 manual Using the NetWare Tape Backup, Using a CD-ROM with NetWare

Using the NetWare Tape Backup

Included with Novell NetWare is a server-based tape backup utility called sbackup.nlm. This utility allows you to backup server disk drives to a server tape drive. The utility supports HP host adapters.

Novell NetWare documentation contains instructions for loading the server backup software. Refer to the NetWare Server Backup Manual to load the tapedai, tsa, and sbackup modules.

1.Once you have loaded adpt160m.ham, load tsaxxx.nlm (tsa312.nlm, tsa400.nlm, tsa410.nlm) and sbackup with these options:

:load scsi2tp.cdm :load tsaxxx :load sbackup

The appropriate driver that interfaces sbackup to ASPI is loaded automatically.

2.When sbackup is loaded, it asks for a login name. Enter the appropriate name.

3.If sbackup asks you to select the device driver, select the HP DIBI-2 Tape Driver, regardless of the type of SCSI tape drive being attached (e.g., even if the tape drive is manufactured by Wangtek, do not select the Wangtek driver).

Novell publishes a list of SCSI tape drives supported by sbackup.nlm.

Using a CD-ROM with NetWare

To use a CD-ROM with NetWare, follow these instructions:

1.Load adpt160m.ham by entering the following line:

:load [pathname]adpt160m

2.The scsicd.cdm driver will auto-load if the device(s) are detected.

61