4.Reboot your computer after configuring for
5.Follow the instructions in your NetWare documentation for installing a new server.
6.After NetWare installs the DOS portion of the software, down and exit to DOS from the server prompt.
7.Copy the adpt160m.ham and adpt160m.ddi from the NetWare directory of the Ultra3 Family Manager Set disk for NetWare to the c:\server.312 directory.
8.Change directory to c:\server.312, and copy the nwpa_up.exe patch file to the directory.
9.Run nwpa_up.exe (this will create another file, 312ptd.exe. Answer Y to the prompt to overwrite cdrom.nlm.)
10.Run 312ptd.exe.
11.Create the directory c:\server.312\cdsave.
12.Copy cdrom.nlm to c:\server.312\cdsave
13.Execute the following command lines to swap the server’s loader: cd 312ptd\native\loader
lswap loader.exe \server.312\server.exe cd \server.312
14.Create the startup.ncf file in the c:\server.312 directory using Edit or a text editor with the following lines:
load c:\server.312\312ptd\native\start\npapatch
load c:\server.312\mmattrfx
load c:\server.312\nbi31x
load c:\server.312\adpt160m
Add any additional driver load lines for
15.Run server.exe.
16.Note the slot number detected for the HP Ultra3 SCSI host bus adapter.
50
