HP NetServer 5971-0821 manual Installing the HP Ultra3 Scsi Host Bus Adapter

Installing the HP Ultra3 SCSI Host Bus Adapter

1.Discharge any static electricity build-up before handling the SCSI host bus adapter by touching a grounded metal object (like the exposed metal parts on the back of your HP Netserver).

WARNING Turn OFF power to the HP Netserver and disconnect the power cord.

2.After you turn off your HP Netserver and unplug the power cord, remove the cover from the Netserver.

32-bit PCI Slot

64-bit PCI Slot

Figure 1-3. 32-bit and 64-bit Expansion Slots

3.Locate an unused 64-bit PCI expansion slot and remove the expansion slot cover. If the HP Netserver does not have a 64-bit slot, you can install the host adapter in a 32-bit PCI slot. (The expansion slot must be compliant with PCI Rev. 2.1 or higher and must support Bus Mastering.)

3