•DisableMultipleRequests— This limits the number of commands to each logical device to one. The data type for this value is
REG_DWORD.
•MaximumLogicalUnit — This can limit the scan for connected devices on the SCSI bus. Valid values are 0 to 7. If 1 is specified, the Windows 2000 SCSI manager assumes that no SCSI targets support LUNs other than 0. Otherwise, LUNs from 0 to 7 are scanned during system initialization. The data type for this value is REG_DWORD.
•MaximumSGList — Specifies the maximum number of Scatter/Gather elements. Valid values are
REG_DWORD.
To enter Windows 2000 parameters, follow these steps:
1.Select Run from the Start button.
2.Type regedt32 and press Enter.
3.Open the registry list to the following location:
\HKEY_LOCAL_MACHINE\System\CurrentControlSet\ Services\adpu160m\Parameters\Device
If the Parameters\Device entering values. If the keys continuing with Step 4.
keys already exist, skip to Step 8 below to begin do not yet exist, you will need to create them by
4.Click on the adpu160m key.
5.Select Add Key from the Edit menu; type Parameters in the Key Name edit box. Leave the Class edit box blank.
6.Click on the Parameters key.
7.Select Add Key from the Edit menu; type Device in the Key Name edit box. Leave the Class edit box blank.
8.To specify a certain host adapter, append Device with the number of the host adapter. For example, type Device0 for the first host adapter, Device1 for the second, etc. If you omit the host adapter number, the configuration information applies to all Ultra3 host adapters.
9.Click on the Device key.
40
