HP NetServer 5971-0821 manual Installing the Driver When UnixWare is Already Installed

6.If necessary, enter the DCU (Device Configuration Utility) to view/change the UnixWare device driver configuration data.

7.Follow the on-screen instructions to continue with installation. Refer to the UnixWare documentation and on-screen help files for help in selecting options.

NOTE If your installation fails, do not attempt to use the update installation pkgadd procedure to fix the installation. Follow the instructions in the UnixWare documentation and in this User’s Guide to retry the installation.

Installing the Driver When UnixWare is Already Installed

To update or install the adst21 driver or adst70 driver on a system where UnixWare is already installed, follow the instructions in this section. The procedures are similar for UnixWare 2.1x and 7.1. Procedures that are specific to a UnixWare version are noted when necessary.

CAUTION Improper or corrupt driver updates might destroy your existing UnixWare file system. Back up all important files before proceeding. Consult your UnixWare documentation for proper backup procedures.

Installing or updating the driver involves the following tasks, which must be completed in the following order:

1.Back Up the Computer—Backs up the old UnixWare kernel and any other important files.

2.Load the Package—Uses pkgadd to load the HP Ultra3 Family driver package.

3.Modify the New System File—For computers booting from a device connected to HP Ultra3 SCSI host bus adapter, modifies the new driver that

84