SCSISelect Options | Available | Default |
| Settings | Setting |
Initiate Wide Negotiation
Enable Disconnection
Send Start Unit Command
Enable Write Back Cache1
BIOS Multiple LUN Support2 Include in BIOS Scan2
Advanced Configuration Options:
Reset SCSI Bus at IC Initialization
Display <Ctrl> <A> Messages during BIOS Initialization
Extended BIOS Translation for DOS Drives > 1 GByte
Verbose/Silent Mode
Host Adapter BIOS
Domain Validation2
Support Removable Disks Under BIOS as Fixed Disks2
BIOS Support for Bootable
Yes, No | Yes (Enabled) |
Yes, No | Yes (Enabled) |
Yes, No | Yes (Enabled) |
N/C (No Change) | N/C (No |
Yes, No | Change) |
Yes, No | No (Disabled) |
Yes, No | Yes (Enabled) |
Enabled, Disabled | Enabled |
Enabled, Disabled | Enabled |
Enabled, Disabled | Enabled |
Verbose, Silent | Verbose |
Enabled | Enabled |
Disabled: Not Scan |
|
Disabled: Scan Bus |
|
Enabled, Disabled | Enabled |
Disabled, Boot Only, | Disabled |
All Disks |
|
Enabled, Disabled | Enabled |
Enabled, Disabled | Enabled |
1Setting is valid only if Multiple LUN Support is enabled 2Settings are valid only if host adapter BIOS is enabled
Starting SCSISelect
Follow these steps to start SCSISelect: 1. Turn on or restart your system.
16
