HP NetServer 5971-0821 manual Microsoft Windows 2000 Installation, Press any key to boot from CD

4Microsoft Windows 2000 Installation

This chapter explains how to install the HP Ultra3 Family Manager Set driver for Windows 2000.

If you are performing a first-time Windows 2000 installation, see Installing the Driver When Installing Windows 2000. If Windows 2000 is already installed in your system, see To Update the Driver When Windows 2000 is Already Installed on page 37.)

Installing the Driver When Installing Windows 2000

1.Start your system with the Windows 2000 Operating System CD-ROM disc in your CD-ROM drive.

NOTE When using a CD-ROM drive to install Windows 2000 from the bootable CD-ROM, make sure Bootable CD-ROM support is enabled in either the system or SCSI BIOS setup utility. If these options are not available, boot from the Windows 2000 floppy disks.

2.You may see a message:

Press any key to boot from CD.

3.After Windows 2000 has completed installation, please reinstall your SCSI driver from the Device Manager. Follow the steps in “Installing the Driver When Windows 2000 is Already Installed” on page 37 to ensure the desired driver is installed.

Installing the Driver When Windows 2000 is Already Installed

To update or install the driver if Windows 2000 is already installed, follow these instructions:

37