SECO-LARM USA EV-1826-NKGQ, EV-1826-PKGQ manual Specifications, Parts List, Ccd

EV-11LR

ENFORCER 84-IR LED Bullet Cameras

Specifications:

Model #		EV-1826-NKGQ		EV-1826-PKGQ
Type			IR LED Bullet Camera
CCD			1/3” Sony Super HAD II
# of infrared LEDs			84
Lens			2.8~12mm
Resolution		600 TV lines		600 TV Lines
Pickup elements		768x494 pixels		752x582 pixels
Sync			Internal
Video output		1.0Vp-p Composite video, 75Ω
Video output format		NTSC		PAL
Minimum	LEDs OFF		0.1	Lux
illumination	LEDs ON		0 Lux
Gamma correction			0.45
S/N ratio			>45dB
Shutter control			Auto Electric Shutter (AES)
Gain control			Auto
IP rating			IP66
LED range			Up to 210ft (64m)
Operating voltage			12VDC
Current	LEDs OFF	130mA		130mA
draw	LEDs ON	660mA		660mA
Operating temperature			14°~122° F	(-10°~50°C)
Dimensions		1013/16” x 45/16” x 45/8” (275 x 116 x 118 mm)
Weight			2-lb 7-oz (2kg)

Parts List:

1 x IR camera 1 x Sunshield	1 x DC plug with	1 x Manual	1 x Hex wrench	4 x Mounting screws
	terminal block

Optional EV-11LS Single-Gang Mounting Plate (Sold separately):
ENFORCER 84-IR LED Bullet Cameras can
mount to an optional single-gang mounting plate.
1.	Run the camera’s wires through the plate.	EV-11LS
2.	Use the 4 included mounting screws to mount
	the EV-11LS single-gang plate to the wall.
3.	Remove the base from the camera by twisting
4.	Twist the camera into the plate until it is tight.

5.Screw the mounting arm into the plate until it is tight.

6.Tighten the adjustment nut on the camera.

7.Tighten the secure screw on the plate.

Optional EV-11LR Round Junction Box (Sold separately):

ENFORCER 84-IR LED Bullet Cameras can mount to an optional round junction box.

1. Use the mounting template (included with the EV-11LR) to mark and drill into the wall, if necessary.

2. Use 4 mounting screws (included with the EV-11LR) to mount the junction box to the wall.

3. Mount the camera through the foam pad (included with the EV-11LR) to the junction box.

4.Wire can either be run through the large opening in the center of the EV-11LR or through the conduit fittings on the side.

2 SECO-LARM U.S.A., Inc.