A.O. Smith GWT-2500, GWT-300 Suggested Specification, Commercial Gas Boilers, AOSDG61020

Commercial Gas Boilers

Configuration H

Configuration P

Configuration S

Configuration V

SUGGESTED SPECIFICATION

Hot Water Supply System - shall consist of A. O. Smith Ac-U-Temp®factory assembled unit Model No.______. System shall be completely factory

assembled and shall include the A. O. Smith Genesis hot water supply boiler(s), with input of ______ BTU/H for ______ gas and recovery capacity

of ______ gph, and the A. O. Smith glass-lined (cement/epoxy) hot water storage tank with ______ gallons capacity for ______ mounting (vertical-

horizontal). System shall include properly sized circulator, inlet and outlet thermometers, tank temperature thermometer, relief valve, and tank temperature control. Entire system shall be rigidly mounted on welded steel skid base and shipped assembled to job site (Ac-U-Temp systems employing tanks too large for shipping as an assembled unit, will be shipped with the tank mounted on a split bolt-together skid).

See Genesis Boiler Specifications and Storage Tank Specifications in your A & E book. Hot water supply boiler(s) and storage tank(s) shall have a 5 year limited warranty against corrosion as outlined in the written warranty.

NOTE: Custom arrangement also available. Consult factory.

For Technical Information and Automated Fax Service, call 800-527-1953. A.O. Smith Corporation reserves the right to make product changes or improvements without prior notice.

www.hotwater.com	AOSDG61020
Revised August 2008	PG 4 OF 4