EMC 69001166 manual Prepare SRM, Boot LUN, Information

Tru64 UNIX Installation Checklist

Task		With Access Logix		Reference Document
6	Server	❑ At the SRM console, execute the init command.		Host connectivity guide for Tru64 UNIX
	Prepare SRM			and Tru64 UNIX documentation
		❑ Verify that the boot LUN is visible to the console with the
	Console for Boot LUN
		following command:
		wwidmgr -show wwid
		❑ Execute the following command:
		wwidmgr -quickset -udid udid-num
		where udid-num is the UDID number of the boot LUN.
		❑ At the SRM console, execute the init command.
		❑ Checkpoint — Verify that the boot LUN is visible with
		the following command:
		show device
7	Server	❑ Install Tru64 UNIX on the boot LUN.		Host connectivity guide for Tru64 UNIX
	Install Tru64 UNIX on			and Tru64 UNIX documentation
		❑ Apply any required patches and driver updates.
	boot LUN
		❑ Create an entry in /etc/ddr.dbase to provide support for
		CLARiiON LUNs.
		❑ Shut down the server.
8	Switches	❑ Create the rest of the zones between the SPs and the		Switch management documentation
	Zone additional paths	appropriate HBAs on the server.
9	Storage System	❑ Use Navisphere Manager to disconnect the server from		Navisphere Manager administrator’s
	Update connection	the Storage Group containing the boot LUN.		guide and online help
	information	❑ Use Navisphere Manager to register the remaining
		connections for each HBA with the following Initiator
		Record properties:
		Property	Value
		Initiator Type	Compaq/Tru64
		ArrayCommPath	Selected
		Failover Mode	0
		Unit Serial Number	Array
		❑ Reconnect the server to the Storage Group containing
		the boot LUN.

6-8

EMC Installation Roadmap for CX-Series and FC-Series Storage Systems