EMC 69001166 manual Or storage System

AIX Installation Checklists

Task		With Access Logix	Without Access Logix	Reference Document
9	Server	❑ Cable the HBA ports to the switch	❑ Cable the HBA ports to the switch	Storage-system setup
	Cable to switches	connected to the storage system	connected to the storage system	guide.
		or to SP ports.	or to SP ports.
	or storage
	system	❑ Execute the following AIX	❑ Execute the following AIX	AIX documentation
		command:	command:
		cfgmgr	cfgmgr
		❑ Checkpoint - For a SAN, verify	❑ Checkpoint - For a SAN, verify	Switch documentation
		the HBA connection to the switch	the HBA connection to the switch
		by checking the LED(s) for the	by checking the LED(s) for the
		switch port connected to the HBA	switch port connected to the HBA
		port.	port.
		For a 1-Gbit switch - LED is	For a 1-Gbit switch - LED is
		green, which indicates that the	green, which indicates that the
		HBA is logged in to the switch	HBA is logged in to the switch
		port.	port.
		For a 2-Gbit switch - One of the	For a 2-Gbit switch - One of the
		following:	following:
		• The left LED is green and the	• The left LED is green and the
		right LED is off, which indicates	right LED is off, which indicates
		that a 1-Gbit SP port is logged	that a 1-Gbit SP port is logged
		in to the switch port.	in to the switch port.
		• For a DS-xxB2 switch, both	• For a DS-xxB2 switch, both
		LEDs are green, which	LEDs are green, which
		indicates that a 2-Gbit HBA	indicates that a 2-Gbit HBA
		port is logged in to the switch	port is logged in to the switch
		port.	port.
		• For a DS-xxM2 switch, the left	• For a DS-xxM2 switch, the left
		LED is blue and the right LED	LED is blue and the right LED
		is off, which indicates that a	is off, which indicates that a
		2-Gbit HBA port is logged in to	2-Gbit HBA port is logged in to
		the switch port.	the switch port.
10	Switches	For a SAN	For a SAN	Switch management
	Zone	❑ Zone the switches to provide a	❑ Zone the switches to provide a	documentation
		path from each HBA port (host	path from each HBA port (host
		initiator) to the appropriate SPs.	initiator) to the appropriate SPs.
		❑ If MirrorView is installed, create
		any required zones for it.
		❑ Checkpoint - Use switch	❑ Checkpoint - Use switch
		management software to verify	management software to verify
		the switch connections to the	the switch connections to the
		storage system.	storage system.

1-16

EMC Installation Roadmap for CX-Series and FC-Series Storage Systems