EMC 69001166 manual Execute the following command AIX documentation

			AIX Installation Checklists
Task		With Access Logix	Reference Document
19	Server	❑ Execute the following command:	AIX documentation
	Configure	emc_cfgmgr.sh
	devices	❑ Execute the following PowerPath command:	PowerPath product
		powermt config	guide
		❑ Checkpoint - Verify that the server sees hdiskpower devices for the
		LUNs.
		❑ Checkpoint - Verify that PowerPath sees all the paths to the LUNs with the
		following PowerPath command:
		powermt display dev=all class=clariion
		If PowerPath does not see the LUNs
		• Verify the server’s connection to the Storage Group.
		• Verify that you registered your PowerPath license key if you have one.
		• Verify that the storage-system properties are as defined in step 13.
		❑ Restart the Navisphere Host Agent or run the Navisphere Server Utility	CX-Series Server
		with the following AIX commands:	Software for AIX
		Host Agent/	installation guide
		etc/rc.agent stop
		/etc/rc.agent start
		Server Utility
		/usr/lpp/HOSTUTIL/naviserverutil
		❑ Checkpoint if the Host Agent is installed - Use Navisphere Manager to	Navisphere Manager
		verify that the LUNs are mapped to hdiskpower devices.	administrator’s guide
			and online help
20	Server	❑ Create partitions or the pertinent database file systems on the LUNs.	Host connectivity guide
	Make LUNs	If AIX does not recognize any LUNs, verify the connection to the Storage	or AIX documentation
	available to AIX	Group.
21	Server	If you have a PowerPath license key	PowerPath product
	Test PowerPath	Note If your PowerPath license key is not registered, the load balancing policy is	guide
	with a license key	restricted to basic failover.
		❑ View the LUNs available to the server using the following PowerPath
		command:
		powermt display dev=all class=clariion
		❑ Choose one available LUN to receive I/O for the test.
		❑ View the paths to the chosen LUN using the following PowerPath
		command:
		powermt display dev=x every=2
		where x is pseudo device that represents the chosen LUN.

PowerPath Checklist — Existing AIX Server and New Storage System

1-27