EMC 69001166 manual HP-UX commands Software for HP-UX Installation Guide

HP-UX Installation Checklist

Task		With Access Logix		Reference Document
14	Server	❑	Reverify that HP-UX sees device entries for all LUNS with the following	HP-UX documentation
	Make target SPs		HP-UX command:
	available (cont.)		ioscan -fnC disk
15	Storage System	❑	Use Navisphere Manager to set general storage-system properties.	Navisphere Manager
	Configure			administrator’s guide
				and online help
		❑ Use Navisphere Manager to create RAID Groups, bind LUNs, create
			Storage Groups, and assign LUNs to Storage Groups.
		❑ Use Navisphere Manager to connect the server to a Storage Group.
16	Server	❑	Log in as root and restart the Navisphere Host Agent with the following	CX-Series Server
	Make LUNs		HP-UX commands:	Software for HP-UX
				Installation Guide
	visible		/sbin/init.d/agent stop
			/sbin/init.d/agent start
		❑	Checkpoint - Verify that HP-UX can recognize these LUNs with the	HP-UX documentation
			following HP-UX commands:
			ioscan -fnC disk
			insf -e
			If HP-UX does not recognize any LUNs, verify the connection to the
			Storage Group.
		❑	Verify that HP-UX sees device entries for all LUNS with the following	HP-UX documentation
			HP-UX command:
			ioscan -fnC disk
17	Storage System	❑	Plan your monitoring configuration.	Navisphere Manager
	Set up Event	❑	Use Navisphere Manager to set user options, create templates, and set up	administrator’s guide
				and online help
	Monitor
			your monitoring configuration.

2-30

EMC Installation Roadmap for CX-Series and FC-Series Storage Systems