EMC 69001166 manual Verify that Guide, State of the uncabled paths becomes dead, Lvm Hp-Ux

HP-UX Installation Checklist

Task		With Access Logix	Reference Document
19	Server	❑ View the output of the powermt display dev=x every=2 command, and	PowerPath product
	Test PowerPath	verify that	guide
	with a license	• The state of the uncabled path(s) becomes “dead.”
	key (cont.)	• I/O continues to the remaining path(s) to the LUN, indicating that the
		path failover was successful, and PowerPath is working properly.
		❑ Reconnect the cable that you disconnected from the HBA.
		❑ If you did not follow the above steps exactly and caused any LUNs to
		trespass, restore the LUNs to their original SP with the following PowerPath
		command:
		powermt restore
20	Server	❑ Prepare the LUNs to receive data using the Logical Volume Manager	Host connectivity guide
	Make LUNs	(LVM).	and HP-UX
	available to	If HP-UX does not recognize any LUNs, verify the connection to the	documentation
	HP-UX
		Storage Group.

You are now ready to set up any optional software, such as SnapView or MirrorView, on the storage system.

2-32

EMC Installation Roadmap for CX-Series and FC-Series Storage Systems