EMC 69001166 manual Or MirrorView, on the storage system

		NetWare Installation Checklists
Task	With Access Logix		Reference Document
20 Server	❑ View the output of the powermt display dev=x every=2 command, and
Test PowerPath	verify that
with a license key	• The state of the uncabled path(s) becomes “dead.”
(cont.)	• I/O continues to the remaining path(s) to the LUN, indicating that the
	path failover was successful, and PowerPath is working properly.
	❑ Reconnect the cable that you disconnected from the HBA.
	❑ If you did not follow the above steps exactly and caused any LUNs to		PowerPath product
	trespass, restore the LUNs to their original SP with the following		guide
	PowerPath command:
	powermt restore
	You are now ready to set up any optional software, such as SnapView
	or MirrorView, on the storage system.

PowerPath Checklist — Existing NetWare Server and New Storage System

4-27