EMC 69001166 manual Servername -type

			NetWare Installation Checklists
Task	With Access Logix	Without Access Logix		Reference Document
8 FC4500 Storage	For existing HBAs			Navisphere CLI
System	An existing HBA is one that is			reference
Set properties for
	registered with the storage system.
PowerPath	❑ From the computer connected to
(cont.)
	the storage system’s serial port,
	use the following Navisphere CLI
	commands to set the following
	storage-system properties for the
	server’s existing HBA existing
	ports (initiators):
	navicli -np -d device
	storagegroup -sethost -host
	servername -type 3
	navicli -np -d device
	storagegroup -sethost -host
	servername -failovermode 1
	navicli -np -d device
	storagegroup -sethost -host
	servername -arraycommpath 1
	where
	device is the name of the
	computer port connected to the
	storage-system serial port (for
	example, com1).
	servername is the name of the
	server with the HBAs

PowerPath Checklist — Existing NetWare Server and Existing Storage System

4-33