EMC 69001166 manual Agent, # Options Supported Autotrespass, Set properties

			HP-UX Installation Checklist
Task		With Access Logix		Reference Document
6	Server	❑ Install the Navisphere Host Agent.		CX-Series Server
	Install Host	❑ Modify user login scripts.		Software for HP-UX
				Installation Guide
	Agent
		❑ Edit the Navisphere Host Agent configuration file (agent.config) as follows:
		• Add the following entry if it does not already exist:
		device auto auto
		• Add at least one privileged user.
		❑ Verify that the Navisphere Host Agent configuration file (agent.config) has
		the following entry commented out:
		# Options Supported Autotrespass
		(leading # is present)
		The above entry will set the initiator type for the HBAs to auto trespass
		when Host Agent is restarted later in this procedure.
		❑ Continue to edit other entries in the Navisphere Host Agent configuration
		file (agent.config) as desired.
		❑ Restart the Host Agent to register the HBAs with the storage system.
7	Storage System	❑ Use Navisphere Manager to define a global administrator and domain (if		Navisphere security
	Set up security	not already defined) and any additional users.		administrator’s guide
				and Navisphere
				Manager online help
8	Storage System	❑ Use the following Navisphere CLI commands to set the default failover		Navisphere CLI
	Set properties	mode and array commpath properties with the following commands:		reference
		navicli -h hostname failovermode 2
		navicli -h hostname arraycommpath 1
		where hostname is the IP address or network name of an SP in the storage
		system.
9	Storage System	❑ Use Navisphere Manager to set general storage-system properties.		Navisphere Manager
	Configure			administrator’s guide
				and online help
		❑ Use Navisphere Manager to create RAID Groups, bind LUNs, create
		Storage Groups, and assign LUNs to Storage Groups.
		❑ Use Navisphere Manager to connect the host initiators to Storage Groups.

DMP Checklist - New HP-UX Server and New Storage System

2-49