EMC 69001166 manual ISCSI initiator Ports, Or NICs with

					Windows Installation Checklists
Task		With Access Logix		Without Access Logix		Reference Document
10	Server	❑	Checkpoint - For a network			Switch documentation
	Cable additional		connection with the server, verify
			the storage-system connections
	HBAs tor NICs to
			to the network router or switch by
	Fibre Channel
			checking the LED(s) for the router
	switches,
			or switch port connected to each
	network, or
			SP port.
	storage-system
	data ports (cont.)
11	Server With a	For NICs		N/A		Storage-system setup
	CX500i Storage	❑ Use Microsoft iSCSI Software				guide
	System		Initiator on the server to configure
	Configure
			the iSCSI initiators for each NIC
	additional server		port.
	iSCSI initiator
	ports	For iSCSI HBAs
		❑ Use QLogic SANsurfer to
			configure the network parameters
			for each or for each HBA.
12	Fibre Channel	For a SAN		For a SAN		Switch management
	Switches	❑ Zone the Fibre Channel switches		Zone the Fibre Channel switches to		documentation
	Zone additional
			to provide a path from each	provide a path from each additional
	paths		additional HBA port (host initiator)	HBA port (host initiator) to the SPs.
			to the SPs.
		❑	Checkpoint - Use switch	❑ Checkpoint - Use switch
			management software to verify	management software to verify
			the switch connections to the	the switch connections to the
			storage system.	storage system
13	Server	❑ Restart the Host Agent or run the		❑ Use the Disk Management tool to		Windows documentation
	Register		Server Utility, then use the Disk	scan for disks.
			Management tool to scan for
	additional HBAs
			disks.
	or NICs with
	storage system	❑	Checkpoint - Use Navisphere			Navisphere Manager
			Manager’s Connectivity Status			administrator’s guide
			dialog box to verify that each HBA			and online help
			is registered with the storage
			system.

PowerPath Checklist — Existing Windows Server and Existing Storage System

7-53