EMC 69001166 manual Create HBA, Prepare for, Installing, Operating System

Windows Installation Checklists

Task		With Access Logix		Without Access Logix		Reference Document
5	Storage System	❑ Reboot the server so Windows		❑ Reboot the server so Windows		Windows documentation
	Configure (cont.)		Server 2003 or Windows 2000		Server 2003 or Windows 2000
			recognizes the LUNs.		recognizes the LUNs.
			Now the LUNs in the Storage		Now the LUNs look like any other
			Group look like any other disks in		disks in the server.
			the server.
6	Server	❑ Create a diskette with the EMC		❑ Create a diskette with the EMC		URL on 7-5
	Create HBA		HBA driver from the HBA		HBA driver from the HBA
			vendor’s web site.		vendor’s web site
	driver diskette
7	Server	❑ If required, either update the		❑ If required, either update the		HBA documentation
	Set up HBA BIOS		Emulex HBA firmware and/or		Emulex HBA firmware and/or	(see URL on 7-5)
			BIOS or update the QLogic HBA		BIOS or update the QLogic HBA
			firmware and/or NVRAM.		firmware and/or NVRAM.
		❑	Reboot the server.	❑	Reboot the server.
		❑ Set up HBA BIOS.		❑ Set up HBA BIOS.
8	Fibre Channel	For a Fibre Channel SAN		For a Fibre Channel SAN		Switch management
	Switches	❑ Zone the Fibre Channel switches		❑ Zone the Fibre Channel switches		documentation
	Zone		to provide a single from the		to provide a single from the
			server to each SP.		server to each SP.
		❑ Checkpoint - Use Fibre Channel		❑	Checkpoint - Use Fibre Channel
			switch management software to		switch management software to
			verify the switch connections to		verify the switch connections to
			the storage system.		the storage system
9	Storage System	❑	Use Navisphere Manager’s	N/A		Navisphere Manager
	Register HBAs		Connectivity Status dialog box			administrator’s guide
			to register each HBA with the			and online help
			storage system.
10	Server	❑ Disconnect any SCSI hard disk		❑ Disconnect any SCSI hard disk		HBA documentation
	Prepare for		connected to the server.		connected to the server.	(see URL on 7-5)
	installing	❑ Configure the HBA boot BIOS.		❑ Configure the HBA boot BIOS.
	operating
	system
11	Server	❑ Install Windows Server 2003 or		❑ Install Windows Server 2003 or		Windows documentation
	Install Windows		Windows 2000 and the HBA		Windows 2000 and the HBA	and HBA documentation
			driver on the boot LUN in the		driver on the boot LUN in the	(see URL on 7-5)
	Server 2003 or
			storage system.		storage system.
	Windows 2000
		Note: During the installation		Note: During the installation
		procedure, you will partition the boot		procedure, you will partition the boot
		LUN.		LUN

7-28

EMC Installation Roadmap for CX-Series and FC-Series Storage Systems