EMC 69001166 manual Manage the storage system, Zones

			NetWare Installation Checklists
Task		With Access Logix		Reference Document
9	Storage System	❑ Connect the storage system to the switch or HBA ports.		Storage-system setup
	Cable to switch			guide.
	or server and	❑ Checkpoint - For a SAN, verify the storage-system connections to the
	LAN
		switch by checking the LED(s) for the switch port connected to each SP
		port.
		For a 1-Gbit switch - LED is green, which indicates that the SP is logged
		in to the switch port.
		For a 2-Gbit switch - One of the following:
		• The left LED is green and the right LED is off, which indicates that a
		1-Gbit SP port is logged in to the switch port.
		• For a DS-xxB2 switch, both LEDs are green, which indicates that a
		2-Gbit HBA port is logged in to the switch port.
		• For a DS-xxM2 switch, the left LED is blue and the right LED is off,
		which indicates that a 2-Gbit HBA port is logged in to the switch port.
		❑ Cable each SP to the LAN connected to the hosts from which you will
		manage the storage system.
10	Storage System	❑ Use Navisphere Manager to define a global administrator and domain (if		Navisphere security
	Set up security	not already defined) and any additional users.		administrator’s guide
				and Navisphere
				Manager online help
11	Storage System	❑ Use the following Navisphere CLI commands to set the following default		Navisphere CLI
	Set Properties for	storage-system properties:		reference
	PowerPath	navicli -h hostname systemtype -config 3
		navicli -h hostname failovermode 1
		navicli -h hostname arraycommpath 1
		where hostname is the IP address or network name of an SP in the
		storage system.
12	Switches	For a SAN		Switch management
	Zone	❑ Zone the switches to provide a path from each HBA port (host initiator) to		documentation
		the appropriate SPs.
		❑ If SAN Copy, MirrorView, or MirrorView/A is installed, create any required
		zones.
		❑ Checkpoint - Use switch management software to verify the switch
		connections to the storage system.

PowerPath Checklist — New NetWare Server and New Storage System

4-9