EMC 69001166 manual Mount any file systems, Mount file, Unmounted in step, Systems

HP-UX Installation Checklist

Task		With Access Logix	Without Access Logix	Reference Document
14	Server	❑ View the output of the powermt	❑ View the output of the powermt	PowerPath product
	Test PowerPath	display dev=x every=2	display dev=x every=2	guide
		command, and verify that	command, and verify that
	with a license
	key (cont.)	• The state of the uncabled	• The state of the uncabled
		path(s) becomes “dead.”	path(s) becomes “dead.”
		• I/O continues to the remaining	• I/O continues to the remaining
		path(s) to the LUN, indicating	path(s) to the LUN, indicating
		that the path failover was	that the path failover was
		successful, and PowerPath is	successful, and PowerPath is
		working properly.	working properly.
		❑ Reconnect the cable that you	❑ Reconnect the cable that you
		disconnected from the HBA.	disconnected from the HBA.
		❑ If you did not follow the above	❑ If you did not follow the above
		steps exactly and caused any	steps exactly and caused any
		LUNs to trespass, restore the	LUNs to trespass, restore the
		LUNs to their original SP with the	LUNs to their original SP with the
		following PowerPath command:	following PowerPath command:
		powermt restore	powermt restore
15	Server	❑ Mount any file systems	❑ Mount any file systems	HP-UX documentation
	Mount file	unmounted in step 1.	unmounted in step 1.
	systems

2-44

EMC Installation Roadmap for CX-Series and FC-Series Storage Systems