EMC 69001166 manual Insert the PowerPath installation CD and mount it

				HP-UX Installation Checklist
Task		With Access Logix			Reference Document
6	Server	❑ Insert the PowerPath installation CD and mount it.			PowerPath Release
	Install PowerPath	❑	Install PowerPath.		Notes and PowerPath
					for UNIX installation
		❑	Register PowerPath.		and administrator’s
					guide
		❑ Install any PowerPath patches from the Software downloads page on the
			EMC Powerlink website:
			http://powerlink.emc.com
		❑ Execute the following PowerPath command:			PowerPath product
			powermt config		guide
		❑ Checkpoint - Use the following PowerPath command to verify that
			PowerPath sees the paths to the LUNs:
			powermt display dev=all class=clariion
			If PowerPath does not see the LUNs
			• Verify the server’s connection to the Storage Group.
			• Verify that you registered your PowerPath license key if you have one.
		❑ If you did not follow the above steps exactly and caused any LUNs to
			trespass, restore the LUNs to their original SP with the following PowerPath
			command:
			powermt restore
7	Storage System	❑ Install the storage system in the cabinet, if not already installed.			Rails and cabinet
	Install				documentation
8	Storage System	❑ Install the Navisphere Initialization Utility on a host on the same subnet as			Storage-system setup
	Initialize and		the storage-system management ports.		guide
	install software	❑ Use the Navisphere Initialization Utility to initialize the storage system.
	enablers
		❑ If you have SAN Copy, SnapView, MirrorView, and/or MirrorView/A			Navisphere Manager
			software, install the enabler for them.		administrator’s guide
					and online help

PowerPath Checklist - Existing HP-UX Server and New Storage System

2-27